... automatically opens and closes flap gates or other optionally available vertical sliding gates using a cable pull on the poultry or chicken house, aviary, or small animal enclosure via a dimmer switch and has an additionally selectable delay of 30 minutes or 60 minutes.
Not an assembly kit, no handicraft work, but a unit that is immediately ready for use!
";s:20:"products_description";s:3398:"also called a hen house flap gate or electronic door opener / closer ( Automatic Hen House Door Opener / Closer ) automatically opens and closes flap gates or other optionally available vertical sliding gates using a cable pull on the poultry or hen house, aviary, or small animal enclosure via a dimmer switch and has an additionally selectable delay of 30 minutes or 60 minutes. The sensitivity of the integrated dimmer switch can be set separately for light and darkness. If there is an animal under the flap the closing process, the motor of the automatic chicken flap JT-HK is automatically stopped when it is put on. The emergency stop closing procedure is repeated 2 times automatically. The emergency stop function is deactivated on the fourth closing attempt.
The JT-HK has a load-limiting device which performs shutdown in the event of the sliding gate being block or being subject to a level of weight that is too high. The JT-HK is suitable for assembly indoors or outdoors and does not open in the event of a storm (lightening).
The mounted motor shaft and motor mounting bracket of the JT-HK are made of solid stainless steel and therefore no maintenance is required.
The gate control unit functions without a mechanical limit switch and is therefore less susceptible to malfunctions.
Further options:
- Connection for external push-buttons available
- Connection for external remote indication available
- Connection for external light control available
If you assembly the KS indoors, your require an outdoor light sensor (SFH).
With our optionally available menu-driven electronic clock timer, the following functions can be set.
- JT-HK opens or closes only with the clock timer, the light sensor (SFH) is idle
- JT-HK opens or closes only via the light sensor (SFH), the clock timer is idle
- JT-HK opens or closes with the clock timer and light sensor (SFH)
- JT-HK opens or closes with the clock timer or light sensor (SFH)
With the optionally available FB radio remote control, you can manually control the JT-HK.
Assembly:
The JT-HK should be fastened in such a way that the internal cord is pulled straight out of the JT-HK Electronic Gate Control Unit. Avoid pulling it out at an angle!
The sliding gate or the flap gate must fastened in the state of being open using the cord (cable pull) at the fastening point (adjusting ring), which is located at the bottom side of the housing (see assembly).
The cord (cable pull) of the sliding gate or the flap gate can be guided using the deflection rollers or the guide pulleys; therefore, attachment of the JT-HK is variable (see assembly examples).
Scope of delivery:
- JT-HK (Gate Control Unit) with integrated light sensor (SFH)
- Plug-in power supply 12 V DC (Approved for indoor use!), ordernumber: 226
Not an assembly kit, no handicraft work, but a unit that is immediately ready for use!
made of 2 mm thick aluminum for closing stables, e.g. B. chicken coop.
The flap locks itself when closed. An animal such as a fox, marten, etc. is no longer able to push up this flap!
Locking only works together with flap actuator KS from JOS Technik from version 09/14, JT-HK, HK-ZSU, as well as Poultry House Butler PHB + PHB2... and cannot be retrofitted to existing flaps!
If the flap is attached on the inside, it cannot be pushed up by a person from the outside, making it more secure against theft!
See assembly!
Dimensions:
Scope of delivery:
made of 2 mm thick aluminum for closing stables, e.g. B. chicken coop.
The flap locks itself when closed. An animal such as a fox, marten, etc. is no longer able to push up this flap!
Locking only works together with flap actuator KS from JOS Technik from version 09/14, JT-HK, HK-ZSU, as well as Poultry House Butler PHB + PHB2... and cannot be retrofitted to existing flaps!
If the flap is attached on the inside, it cannot be pushed up by a person from the outside, making it more secure against theft!
See assembly!
Dimensions:
Scope of delivery:
made of 2 mm thick aluminum for closing stables, e.g. B. chicken coop.
The flap locks itself when closed. An animal such as a fox, marten, etc. is no longer able to push up this flap!
Locking only works together with flap actuator KS from JOS Technik from version 09/14, JT-HK, HK-ZSU, as well as Poultry House Butler PHB + PHB2... and cannot be retrofitted to existing flaps!
If the flap is attached on the inside, it cannot be pushed up by a person from the outside, making it more secure against theft!
See assembly!
Dimensions:
Scope of delivery:
made of 2 mm thick aluminum for closing stables, e.g. B. chicken coop.
The flap locks itself when closed. An animal such as a fox, marten, etc. is no longer able to push up this flap!
Locking only works together with flap actuator KS from JOS Technik from version 09/14, JT-HK, HK-ZSU, as well as Poultry House Butler PHB + PHB2... and cannot be retrofitted to existing flaps!
If the flap is attached on the inside, it cannot be pushed up by a person from the outside, making it more secure against theft!
See assembly!
Dimensions:
Scope of delivery:
made of 2 mm thick aluminum for closing stables, e.g. B. chicken coop.
The flap locks itself when closed. An animal such as a fox, marten, etc. is no longer able to push up this flap!
Locking only works together with flap actuator KS from JOS Technik from version 09/14, JT-HK, HK-ZSU, as well as Poultry House Butler PHB + PHB2... and cannot be retrofitted to existing flaps!
If the flap is attached on the inside, it cannot be pushed up by a person from the outside, making it more secure against theft!
See assembly!
Dimensions:
Scope of delivery:
made of 2 mm thick aluminum for closing stables, e.g. B. chicken coop.
The flap locks itself when closed. An animal such as a fox, marten, etc. is no longer able to push up this flap!
Locking only works together with flap actuator KS from JOS Technik from version 09/14, JT-HK, HK-ZSU, as well as Poultry House Butler PHB + PHB2... and cannot be retrofitted to existing flaps!
If the flap is attached on the inside, it cannot be pushed up by a person from the outside, making it more secure against theft!
See assembly!
Dimensions:
Scope of delivery:
automatically opens and closes a self-locking geese flap 340x550 mm in a fixed frame at the poultry and geese house, aviary or small animal enclosure at dusk and / or at night.
The Poultry House Butler PHB2-RG is equipped with sensors and control elements which allow the opening and closing of the door depending on the temperature:
- Ambient brightness (twilight switch) with adjustable closing time delay
- Time (timer) with day and weekend programme or two closing and opening times a day
- Combination of twilight sensor and timer
- via radio remote control or via GSM module with Android smartphone (both optionally available)
- integrated hand switch
Non-dimmable 230 V lighting as so-called local light, heating or fan can be connected and switched using connection modules. The opening of the flap can be prevented or delayed at low outside temperatures, a temperature sensor is available in the device or can be connected externally.
The main function of the lighting control is to provide the optimum amount of light depending on the current duration of daylight. The lighting control automatically switches on the stable lighting at a time that you can set and dims the light from 0% to 100% (sunrise) within a specified time. The barn lighting is automatically switched off when the associated light sensor detects a preset outdoor brightness. If the outdoor light brightness has already been reached before the start of dimming (summer), the dimming process is not started.
In the evening, the stall lighting is automatically switched on (100%) by the associated light sensor. The dimming process starts from 100% to 0% (sunset) depending on a time that you can set. The lighting is then switched off completely at the set time. Here, too, the lighting control only becomes active if the outside brightness falls below a preset level, i.e. in summer the dimming process is not carried out for most of the time.
Various light sources are possible as lighting sources for the stable. Dimmable LED lamps with 12V DC operating voltage from JOSTechnik can be connected directly to the lighting control system. Alternatively, the use of dimmable fluorescent lamps with electronic ballast EVG (so-called T5 tubes) is possible. This, however, requires an additional JT-Rel-Ls connection unit, which enables 230V AC devices to be used for lighting control. It is not possible to use normal incandescent lamps!
The status of the damper gate valve is displayed:
- in the device display
- red/green LED visible from a distance
- via smartphone with Android system when using the GSM module (GSM module cannot be retrofitted, but can only be installed when ordering a new GSM module)
The PHB2-RG contains a temperature sensor that measures the temperature of the environment and can thus trigger various switching operations:
-When used with an indoor temperature sensor, an electric heat lamp can be switched on (if the stable temperature is too low) or a fan can be switched on for 12V DC for max. 5 hours.
230V accessories require an additional circuit breaker for mains voltage in a separate housing.
-When used with an outdoor temperature sensor, the opening of the damper can be delayed or prevented at low outdoor temperatures.
The PHB2-RG is equipped with a multiline display which can be used to change all settings via a multilingual menu at the touch of a button. The following settings are possible and changeable:
1. brightness value open slider, brightness value close slider
2. current time, switching time open slider, switching time close slider
3. do not open outside temperature for slide valve
4. switch on internal temperature for heater or fan (switch off automatically)
5. switching on the stable lighting depending on the outdoor brightness (switching off takes place automatically)
6. start "sunrise" in the morning / start "sunset" in the evening
The main display shows the following states and values:
1. day and time / software version
in alternation with
2. day and time / temperature outside* , temperature inside*, open or closed, status light sensor
Further status displays are provided by LEDs in different colours.
The PHB2-RG is designed for connection to 12 V DC and has reverse polarity protection. The internal clock is battery-buffered and continues to run even if the supply voltage fails. The set data are stored in the system and are available immediately even after a power failure and subsequent return. The PHB2-RG initializes itself automatically after power supply and remembers the last state before the failure of the supply voltage. This is taken up again when the power supply returns.
The following functions can be set on the integrated menu-driven display:
- PHB2-RG closes and opens only by timer, not by light sensor
- PHB2-RG closes and opens by light sensor only, not by time
- PHB2-RG closes and opens only by light sensor + adjustable closing time delay
- PHB2-RG closes and opens via timer and light sensor
- PHB2-RG closes and opens via timer or light sensor
- PHB2-RG closes and opens manually with pushbutton or radio remote control or in combination with timer and/or light sensor
- Automatic heating of the barn when the temperature falls below a selectable indoor temperature. The heating is switched off when an adjustable upper heating temperature is reached. Both infrared heating lamps and electric radiators can be used as heat sources. These devices are supplied with 230V AC and require the additional connection unit JT-Rel-HL from JOSTechnik.
- Automatic ventilation of the barn if a selectable indoor temperature is exceeded. The ventilation is switched off when an adjustable lower ventilation temperature is reached. Devices with 12V DC operating voltage as well as 230V AC can be used as fans/fans. For 230V devices the additional connection unit JT-Rel-HL from JOSTechnik is required.
The device can be used both outdoors and indoors. The plug-in power supply unit is only suitable for indoor use. Operation of the external devices requires a 230V mains connection.
Mounting:
Fix the PSD-RG to the wall using the 4 screws supplied above the opening hole. Then make the adjustments according to the instructions >>> READY !
* Depending on the installation location of the device, both together only with additional remote temperature sensor (to be ordered separately).
Scope of delivery:
- Poultry House Butler PHB2-RG with (integrated) light sensor, temperature sensor, timer and coiled pull cord
- Fixed frame with integrated self-locking geese flap 340x550 mm Dimensions of the frame: width 370 mm, length 840 mm, height 65 mm
- Power supply 230 V / 12 V DC ( Approved for indoor use! ), Ordernumber: 476
Connections for external remote display are provided!
Download the operating instructions according to the instructions on the invoice and read them through before putting into operation!!!!
";s:19:"products_extra_text";s:0:"";s:11:"products_id";i:472;s:14:"products_price";s:8:"209.2437";s:22:"products_master_status";i:1;s:12:"products_ean";s:13:"0740972162909";s:23:"products_date_available";s:19:"0000-00-00 00:00:00";s:18:"manufacturers_name";s:10:"JOSTechnik";s:16:"manufacturers_id";i:10;}i:14;a:17:{s:14:"products_model";s:7:"PHB2-RB";s:13:"products_name";s:67:"PHB2-RB as frame unit with self-locking duck flap and light control";s:17:"products_quantity";i:14;s:21:"products_shippingtime";i:7;s:14:"products_fsk18";i:0;s:14:"products_image";s:9:"473_0.jpg";s:15:"products_weight";s:5:"2.400";s:26:"products_short_description";s:501:"
The Poultry House Butler PHB2-RB is equipped with sensors and control elements which allow the opening and closing of the door depending on the temperature:
- Ambient brightness (twilight switch) with adjustable closing time delay
- Time (timer) with day and weekend programme or two closing and opening times a day
- Combination of twilight sensor and timer
- via radio remote control or via GSM module with Android smartphone (both optionally available)
- integrated hand switch
Non-dimmable 230 V lighting as so-called local light, heating or fan can be connected and switched using connection modules. The opening of the flap can be prevented or delayed at low outside temperatures, a temperature sensor is available in the device or can be connected externally.
The main function of the lighting control is to provide the optimum amount of light depending on the current duration of daylight. The lighting control automatically switches on the stable lighting at a time that you can set and dims the light from 0% to 100% (sunrise) within a specified time. The barn lighting is automatically switched off when the associated light sensor detects a preset outdoor brightness. If the outdoor light brightness has already been reached before the start of dimming (summer), the dimming process is not started.
In the evening, the stall lighting is automatically switched on (100%) by the associated light sensor. The dimming process starts from 100% to 0% (sunset) depending on a time that you can set. The lighting is then switched off completely at the set time. Here, too, the lighting control only becomes active if the outside brightness falls below a preset level, i.e. in summer the dimming process is not carried out for most of the time.
Various light sources are possible as lighting sources for the stable. Dimmable LED lamps with 12V DC operating voltage from JOSTechnik can be connected directly to the lighting control system. Alternatively, the use of dimmable fluorescent lamps with electronic ballast EVG (so-called T5 tubes) is possible. This, however, requires an additional JT-Rel-Ls connection unit, which enables 230V AC devices to be used for lighting control. It is not possible to use normal incandescent lamps!
The status of the damper gate valve is displayed:
- in the device display
- red/green LED visible from a distance
- via smartphone with Android system when using the GSM module (GSM module cannot be retrofitted, but can only be installed when ordering a new GSM module)
The PHB2-RB contains a temperature sensor that measures the temperature of the environment and can thus trigger various switching operations:
-When used with an indoor temperature sensor, an electric heat lamp can be switched on (if the stable temperature is too low) or a fan can be switched on for 12V DC for max. 5 hours.
230V accessories require an additional circuit breaker for mains voltage in a separate housing.
-When used with an outdoor temperature sensor, the opening of the damper can be delayed or prevented at low outdoor temperatures.
The PHB2-RB is equipped with a multiline display which can be used to change all settings via a multilingual menu at the touch of a button. The following settings are possible and changeable:
1. brightness value open slider, brightness value close slider
2. current time, switching time open slider, switching time close slider
3. do not open outside temperature for slide valve
4. switch on internal temperature for heater or fan (switch off automatically)
5. switching on the stable lighting depending on the outdoor brightness (switching off takes place automatically)
6. start "sunrise" in the morning / start "sunset" in the evening
The main display shows the following states and values:
1. day and time / software version
in alternation with
2. day and time / temperature outside* , temperature inside*, open or closed, status light sensor
Further status displays are provided by LEDs in different colours.
The PHB2-RB is designed for connection to 12 V DC and has reverse polarity protection. The internal clock is battery-buffered and continues to run even if the supply voltage fails. The set data are stored in the system and are available immediately even after a power failure and subsequent return. The PHB2-RB initializes itself automatically after power supply and remembers the last state before the failure of the supply voltage. This is taken up again when the power supply returns.
The following functions can be set on the integrated menu-driven display:
- PHB2-RB closes and opens only by timer, not by light sensor
- PHB2-RB closes and opens by light sensor only, not by time
- PHB2-RB closes and opens only by light sensor + adjustable closing time delay
- PHB2-RB closes and opens via timer and light sensor
- PHB2-RB closes and opens via timer or light sensor
- PHB2-RB closes and opens manually with pushbutton or radio remote control or in combination with timer and/or light sensor
- Automatic heating of the barn when the temperature falls below a selectable indoor temperature. The heating is switched off when an adjustable upper heating temperature is reached. Both infrared heating lamps and electric radiators can be used as heat sources. These devices are supplied with 230V AC and require the additional connection unit JT-Rel-HL from JOSTechnik.
- Automatic ventilation of the barn if a selectable indoor temperature is exceeded. The ventilation is switched off when an adjustable lower ventilation temperature is reached. Devices with 12V DC operating voltage as well as 230V AC can be used as fans/fans. For 230V devices the additional connection unit JT-Rel-HL from JOSTechnik is required.
The device can be used both outdoors and indoors. The plug-in power supply unit is only suitable for indoor use. Operation of the external devices requires a 230V mains connection.
Mounting:
Fix the PSD-RB to the wall using the 4 screws supplied above the opening hole. Then make the adjustments according to the instructions >>> READY !
* Depending on the installation location of the device, both together only with additional remote temperature sensor (to be ordered separately).
Scope of delivery:
- Poultry House Butler PHB2-RB with (integrated) light sensor, temperature sensor, timer and coiled pull cord
- Fixed frame with integrated self-locking flap for BIO-posture 420x370 mm Dimensions of the frame: width 440 mm, length 570 mm, height 65 mm - Power supply 230 V / 12 V DC ( Approved for indoor use! )
Connections for external remote display are provided!
Download the operating instructions according to the instructions on the invoice and read them through before putting into operation!!!!
";s:19:"products_extra_text";s:0:"";s:11:"products_id";i:473;s:14:"products_price";s:8:"208.4034";s:22:"products_master_status";i:1;s:12:"products_ean";s:13:"0740972162916";s:23:"products_date_available";s:19:"0000-00-00 00:00:00";s:18:"manufacturers_name";s:10:"JOSTechnik";s:16:"manufacturers_id";i:10;}i:15;a:17:{s:14:"products_model";s:7:"PHB2-RH";s:13:"products_name";s:91:"Poultry House Butler PHB2-RH as frame unit with self-locking chicken door and light control";s:17:"products_quantity";i:7;s:21:"products_shippingtime";i:7;s:14:"products_fsk18";i:0;s:14:"products_image";s:9:"475_0.jpg";s:15:"products_weight";s:5:"1.600";s:26:"products_short_description";s:522:"The Poultry House Butler PHB2-RH is equipped with sensors and control elements which allow the opening and closing of the door depending on the temperature:
- Ambient brightness (twilight switch) with adjustable closing time delay
- Time (timer) with day and weekend programme or two closing and opening times a day
- Combination of twilight sensor and timer
- via radio remote control or via GSM module with Android smartphone (both optionally available)
- integrated hand switch
Non-dimmable 230 V lighting as so-called local light, heating or fan can be connected and switched using connection modules. The opening of the flap can be prevented or delayed at low outside temperatures, a temperature sensor is available in the device or can be connected externally.
The main function of the lighting control is to provide the optimum amount of light depending on the current duration of daylight. The lighting control automatically switches on the stable lighting at a time that you can set and dims the light from 0% to 100% (sunrise) within a specified time. The barn lighting is automatically switched off when the associated light sensor detects a preset outdoor brightness. If the outdoor light brightness has already been reached before the start of dimming (summer), the dimming process is not started.
In the evening, the stall lighting is automatically switched on (100%) by the associated light sensor. The dimming process starts from 100% to 0% (sunset) depending on a time that you can set. The lighting is then switched off completely at the set time. Here, too, the lighting control only becomes active if the outside brightness falls below a preset level, i.e. in summer the dimming process is not carried out for most of the time.
Various light sources are possible as lighting sources for the stable. Dimmable LED lamps with 12V DC operating voltage from JOSTechnik can be connected directly to the lighting control system. Alternatively, the use of dimmable fluorescent lamps with electronic ballast EVG (so-called T5 tubes) is possible. This, however, requires an additional JT-Rel-Ls connection unit, which enables 230V AC devices to be used for lighting control. It is not possible to use normal incandescent lamps!
The status of the damper gate valve is displayed:
- in the device display
- red/green LED visible from a distance
- via smartphone with Android system when using the GSM module (GSM module cannot be retrofitted, but can only be installed when ordering a new GSM module)
The PHB2-RH contains a temperature sensor that measures the temperature of the environment and can thus trigger various switching operations:
-When used with an indoor temperature sensor, an electric heat lamp can be switched on (if the stable temperature is too low) or a fan can be switched on for 12V DC for max. 5 hours.
230V accessories require an additional circuit breaker for mains voltage in a separate housing.
-When used with an outdoor temperature sensor, the opening of the damper can be delayed or prevented at low outdoor temperatures.
The PHB2-RH is equipped with a multiline display which can be used to change all settings via a multilingual menu at the touch of a button. The following settings are possible and changeable:
1. brightness value open slider, brightness value close slider
2. current time, switching time open slider, switching time close slider
3. do not open outside temperature for slide valve
4. switch on internal temperature for heater or fan (switch off automatically)
5. switching on the stable lighting depending on the outdoor brightness (switching off takes place automatically)
6. start "sunrise" in the morning / start "sunset" in the evening
The main display shows the following states and values:
1. day and time / software version
in alternation with
2. day and time / temperature outside* , temperature inside*, open or closed, status light sensor
Further status displays are provided by LEDs in different colours.
The PHB2-RH is designed for connection to 12 V DC and has reverse polarity protection. The internal clock is battery-buffered and continues to run even if the supply voltage fails. The set data are stored in the system and are available immediately even after a power failure and subsequent return. The PHB2-RH initializes itself automatically after power supply and remembers the last state before the failure of the supply voltage. This is taken up again when the power supply returns.
The following functions can be set on the integrated menu-driven display:
- PHB2-RH closes and opens only by timer, not by light sensor
- PHB2-RH closes and opens by light sensor only, not by time
- PHB2-RH closes and opens only by light sensor + adjustable closing time delay
- PHB2-RH closes and opens via timer and light sensor
- PHB2-RH closes and opens via timer or light sensor
- PHB2-RH closes and opens manually with pushbutton or radio remote control or in combination with timer and/or light sensor
- Automatic heating of the barn when the temperature falls below a selectable indoor temperature. The heating is switched off when an adjustable upper heating temperature is reached. Both infrared heating lamps and electric radiators can be used as heat sources. These devices are supplied with 230V AC and require the additional connection unit JT-Rel-HL from JOSTechnik.
- Automatic ventilation of the barn if a selectable indoor temperature is exceeded. The ventilation is switched off when an adjustable lower ventilation temperature is reached. Devices with 12V DC operating voltage as well as 230V AC can be used as fans/fans. For 230V devices the additional connection unit JT-Rel-HL from JOSTechnik is required.
The device can be used both outdoors and indoors. The plug-in power supply unit is only suitable for indoor use. Operation of the external devices requires a 230V mains connection.
Mounting:
Fix the PSD-RH to the wall using the 4 screws supplied above the opening hole. Then make the adjustments according to the instructions >>> READY !
* Depending on the installation location of the device, both together only with additional remote temperature sensor (to be ordered separately).
Scope of delivery:
- Poultry House Butler PHB2-RE with (integrated) light sensor, temperature sensor, timer and coiled pull cord
- Fixed frame with integrated self-locking chicken flap 230x340 mm Dimensions of the frame: width 260 mm, length 570 mm, height 65 mm - Power supply 230 V / 12 V DC ( Approved for indoor use! )
- Fastening material 4 screws and dowels each
Connections for external remote display are provided!
Download the operating instructions according to the instructions on the invoice and read them through before putting into operation!!!!
";s:19:"products_extra_text";s:0:"";s:11:"products_id";i:475;s:14:"products_price";s:8:"192.4370";s:22:"products_master_status";i:1;s:12:"products_ean";s:13:"0740972162886";s:23:"products_date_available";s:19:"0000-00-00 00:00:00";s:18:"manufacturers_name";s:10:"JOSTechnik";s:16:"manufacturers_id";i:10;}i:16;a:17:{s:14:"products_model";s:13:"PLL.1L.FM.010";s:13:"products_name";s:56:"POLLY FARM MIGNON L - Chicken coop for 4 - 5 laying hens";s:17:"products_quantity";i:4;s:21:"products_shippingtime";i:9;s:14:"products_fsk18";i:0;s:14:"products_image";s:9:"595_0.jpg";s:15:"products_weight";s:6:"36.000";s:26:"products_short_description";s:400:"POLLY FARM MIGNON Size L for 4 to 5 chickens
This versatile chicken coop can raise laying hens, ornamental hens and ornamental ducks or by replacing the nests with an extra perch you can raise chickens or chicks
TECHNICAL SPECIFICATIONS:
Scope of delivery:
Barn according to description, without flap and without control
- Comfortable chicken coop for in 3 sizes
- Size L Dimension : L/W/H 109x131x90 cm for 8-10 chickens
- Size 2XL Dimension : L/W/H 124x141x100 cm for 10-15 chickens
- Size 4XL Dimensions : L/W/H 194x120x110 cm for 15-20 chickens
- Practical opening on the back wall for cleaning the floor of the chicken coop
- Made in multi-layer HPL
- Requires no maintenance. can be assembled and disassembled without tools
- Double roof for easy interior inspection
- HPL cannot be attacked by parasites, resistant to RED MILLS
- Comfortable chicken coop for in 3 sizes
- Size L Dimension : L/W/H 109x131x90 cm for 8-10 chickens
- Size 2XL Dimension : L/W/H 124x141x100 cm for 10-15 chickens
- Size 4XL Dimensions : L/W/H 194x120x110 cm for 15-20 chickens
- Practical opening on the back wall for cleaning the floor of the chicken coop
- Made in multi-layer HPL
- Does not absorb odours or liquids
- Requires no maintenance. can be assembled and disassembled without tools
- Thermally insulated
- Double roof for easy interior inspection
- Resistant to direct weather conditions
- Can be washed and cleaned with any detergent
- HPL cannot be attacked by parasites, resistant to RED MILLS
- Can be easily assembled and disassembled
- Cleaning the coop and removing eggs from the nest very easy
- Very robust and heavy material, stable even in very strong winds
- Attractive design patented at European level
- Innovative wood decor and colour finish
Scope of delivery:
Stall as per description, with flap and without control ( all flap adjusters suitable can be ordered here in the online shop ).
Shipment by forwarding agency on pallet directly from the manufacturer!
";s:19:"products_extra_text";s:0:"";s:11:"products_id";i:596;s:14:"products_price";s:8:"599.1597";s:22:"products_master_status";i:1;s:12:"products_ean";s:0:"";s:23:"products_date_available";s:19:"0000-00-00 00:00:00";s:18:"manufacturers_name";s:16:"IT Design s.r.l.";s:16:"manufacturers_id";i:16;}i:18;a:17:{s:14:"products_model";s:13:"PLL.MD.BG.010";s:13:"products_name";s:74:"Polly Classic 2XL - chicken coop for 6 to 8 chickens with removable drawer";s:17:"products_quantity";i:9;s:21:"products_shippingtime";i:9;s:14:"products_fsk18";i:0;s:14:"products_image";s:9:"598_0.jpg";s:15:"products_weight";s:6:"52.000";s:26:"products_short_description";s:347:"Scope of delivery:
Stable as per description, with flap and without control (all flap adjusters can be ordered here in the online shop).
Shipment by forwarding agent on pallet directly from the manufacturer!
";s:19:"products_extra_text";s:0:"";s:11:"products_id";i:598;s:14:"products_price";s:8:"648.7395";s:22:"products_master_status";i:0;s:12:"products_ean";s:13:"0054047836436";s:23:"products_date_available";s:19:"0000-00-00 00:00:00";s:18:"manufacturers_name";s:16:"IT Design s.r.l.";s:16:"manufacturers_id";i:16;}i:19;a:17:{s:14:"products_model";s:13:"PLL.XX.BG.010";s:13:"products_name";s:75:"Polly Classic 2XL - Chicken coop for 9 to 12 chickens with removable drawer";s:17:"products_quantity";i:8;s:21:"products_shippingtime";i:9;s:14:"products_fsk18";i:0;s:14:"products_image";s:9:"599_0.jpg";s:15:"products_weight";s:6:"62.000";s:26:"products_short_description";s:524:"Chicken coop for 9 to 12 chickens with removable drawer for laying hens with removable drawer.
Without automatic chicken door.
Scope of delivery:
Stable as per description, with flap and without control (all flap adjusters can be ordered here in the online shop).
Shipment by forwarding agent on pallet directly from the manufacturer!
";s:19:"products_extra_text";s:0:"";s:11:"products_id";i:599;s:14:"products_price";s:8:"726.8908";s:22:"products_master_status";i:0;s:12:"products_ean";s:13:"0054047836443";s:23:"products_date_available";s:19:"0000-00-00 00:00:00";s:18:"manufacturers_name";s:16:"IT Design s.r.l.";s:16:"manufacturers_id";i:16;}}s:1:"e";O:8:"DateTime":3:{s:4:"date";s:26:"2026-03-02 12:03:51.445049";s:13:"timezone_type";i:3;s:8:"timezone";s:13:"Europe/Berlin";}s:1:"g";a:0:{}s:1:"m";N;s:1:"c";N;}
